Blue links lead to the fully translated html versions of the page, purple links lead to pages whose start pages (as well as introductions and tables of contents at least) are already set up, green links lead to extern sites, grey means that no file is available yet).
/Notes in this color and between two / are from the operator of the German mirror site and translator/.
Sequence (#C10ab): Img.625/191
"Black bars" in a UFO. The above diagram illustrates clearly that the "black bars" formed from a highly concentrated magnetic field yielded by the propulsors of a UFO are square in the cross-section. This in turn provides further evidence that the propulsors of UFOs utilize the so-called Oscillatory Chambers for the magnetic field production.
Img.625 (#C10a)
The diagram of a "spool-shaped" UFO presented in the book which in monograph [1/4] is referred under the number [5S1.1], page 11. It illustrates a witness's recollection of the spaceship which on May 9, 1969 abducted a soldier named Jose Antonio da Silva from Victoria, Brazil. He was found 4 days later in Bebedouro, 800 kilometres away. It is worth to notice, that in spite this UFO vehicle was recreated "from the memory" of the witness, still it reflects relatively well the most vital components and the general appearance of it.
From the point of view of the "Theory of the Magnocraft", the illustrated spaceship represents the semi attached configuration shown on the right in part (b) of the above Figure. Because the "black bars" formed from the field of this UFO in fact have square cross-section, thus their outlines documented with this illustration provide further evidence that UFOs really use "Oscillatory Chambers" for the magnetic field generation.
Img.191 (#C10b)
One amongst two possible principles of the formation of a so-called "semi-attached configuration" obtained through coupling together by their topside domes two vehicles type K3, mutually facing each other - see Img.364 (#5) on the web page Propulsion). The "Theory of the Magnocraft" reveals that in the principle of forming such a configuration illustrated here, between the main propulsor of the lower spacecraft and the side propulsors of the upper vehicle there must appear columns of a highly concentrated magnetic field that traps light and therefore are visible as "black bars". These "black bars" are intentionally shown on the sides of vehicle illustrated above - they give to the configuration the appearance of an "asymmetrical spool". The cross section of these "black bars" must reflect the shape of the devices used to generate the magnetic field in the propulsors of these vehicles, i.e. if Oscillatory Chambers of the first generation are used for this purpose, the cross-section of the columns must be a square.
Independently from the shown above principle of the formation of a "semi-attached configuration" of Magnocrafts, a similar configuration can also be obtained when all propulsors in both couples vehicles have the same magnetic pole directed in the same directions. In this case the "black bars", if appaer, link outlets from side propulsors of both vehicles - thus the entire configuration looks like a "symmetrical spool". This second principle of the formation of "semi-attached configuration" of Magnocrafts is shown in Img.390 (#5b) from the web page Memorial - about ways UFOnauts undermine the evidential value of authentictic photographs of UFOs.
