< = back | = > Images (overview) < =

Blue links lead to the fully translated html versions of the page, purple links lead to pages whose start pages (as well as introductions and tables of contents at least) are already set up, green links lead to extern sites, grey means that no file is available yet).

/Notes in this color and between two / are from the operator of the German mirror site and translator/.


Update: 12.03.23

Copyright Dr. Eng. Jan Pająk



Img.201 from UFO proof (#C4a)/ (#D8a) - Interpretation UFO photographs



Img.615 from UFO proof (#C4b)



Img.616 from UFO proof (#C4c)


Sequence (#C4abc): Img.201/615/616 The comparison of glowing "magnetic circuits" of UFOs to "magnetic circuits" of Magnocrafts. Such "magnetic circuits" are theoretically predicted for the Magnocrafts. Thus in order to formally prove that "UFOs are already constructed and operational Magnocrafts", such "magnetic circuits" must be also present in UFOs. After making these circuits to spin, the force lines of their magnetic field form a kind of spinning brushes which at the moment of hovering these vehicles above the surface of the Earth sweeps thoroughly this surface. Such a "magnetic brush", amongst others, bends and directs precisely all blades of grass, thus forming the characteristic UFO landing sites known as "crop circles".

Img.201 (#C4a) A night time photograph of two UFOs type K6 coupled into a "flying cluster". It was published in the Journal [5P2] "UFO Sightings" (S.J. Publications, Inc., 1141 Broadway, New York, N.Y. 10001, USA), January 1981 edition, page 15. This photo is the best presentation known to the author of the magnetic circuits of a UFO shown from the side view that is also illustrated in the upper part of "Fig. #C4c". It definitely confirms that the strands of magnetic field force lines join the outlet from the vehicle's main propulsor with the outlets from side propulsors. The course of these magnetic circuits is visible because they ionise the air with their powerful magnetic field, which (the ionised air) glows within the volume of these magnetic circuits.

Img.615 (#C4b) The photograph of the central section in a UFO type K6 flying in the "magnetic whirl" mode of operation. It was taken by Enrique Hausmann over Mallorka (Palma Island), Spain, on 24 April 1950 - see the book [1P2] by Adolf Schneider and Hubert Malthaner: "Das Geheimnis der unbeakannten Flugobjekte", Hermann Bauer Verlag KG Freiburg im Breisgau, West Germany, 1976, ISBN 3 7626 0197 6, page 218. The UFO travelled from east to west, appeared to rotate, and produced a loud buzzing sound. The photograph captures, from below, an outlet of the vehicle's main propulsor of the second generation (i.e. shaped into an octagon). Five strands of spinning force lines of the main "magnetic circuits" are spiralling radial from this outlet. At the edges of the photograph, each one of these five strands splits into three separate streams of the field's force lines. Notice that each middle stream engages more energy from the field than the two side streams. This results from the sinusoidal distribution of the outputs from the vehicle's side propulsors (to see why compare the above photograph with Figure F25 (c) and with the description from subsection F7.2 of monograph [1/4]).

Img.616 (#C4c) Shown are whirling magnetic circuits of the Magnocraft type K6 in an overhead view. By a broken line marked is the section of the vehicle which was captured on the photograph from Img.615 (#C4b) of this illustration. Notice that the thickness of the successive strands of the field has a sinusoidal distribution. For example, if the side propulsors "V" (with the "blackened" outlet) have their maximal output, the propulsors next to them (i.e. "U" and "W" - with "dotted" outlets) are in the mean value of their output, whereas propulsors "X" (with "unmarked" outlets) produce no output at all, while propulsors next to them repeats such a sinusoidal output cycle, etc. This sinusoidal distribution of the magnetic field reflected in the thickness of strands that link the main propulsor with side propulsors, is caused by the 90 degrees phase shift in pulsations of subsequent side propulsors. Spirals formed by such whirling strands of magnetic field that change their thickness sinusoidal, are similar to shapes of streams of water spread by a spinning garden sprinkler.

Visitors since 15.12.22: (english sites)