Blue links lead to the fully translated html versions of the page, purple links lead to pages whose start pages (as well as introductions and tables of contents at least) are already set up, green links lead to extern sites, grey means that no file is available yet).
/Notes in this color and between two / are from the operator of the German mirror site and translator/.
Sequence (#D5abc): Img.192/ Img.193/ Img.194
Daytime appearance of a "non-composite set" (or "non-composite configuration") formed from two UFO vehicles photographed in side view in "magnetic whirl mode". The striking thing about both of the above photographs is that in spite of the fact that they were snapped by people who do not know each other at all, and that they were taken in different parts of the world, the non-composite sets of UFO vehicles they captured look almost exactly the same. It is worth adding here that also the UFO vehicle captured in the entire series of photographs, to which belongs, among others, the photograph from Img.210 (#H3), also represents an "unassembled set of UFOs" - only that it operates in a different "beating mode".
(Img.192) (#D5a):
Here is a photo of a UFO taken by a reader signing himself "Pawel" (Email: pablano@neostrada.pl) in August 2004, around 6 pm, at the entrance to a bridge in Wolin, West Pomeranian Province, Poland. It was meant to be a photo of the bridge and nothing else, as absolutely nothing at that moment in time caught the photographers' attention. Nonetheless, coincidentally, the photo also captured a non-composite configuration, invisible to the human eye, formed of two K7-type UFOs operating in magnetic vortex mode.
The interesting thing about this photo is that, first of all, it documents relatively well the principle that "a UFO always flies with its floor oriented perpendicular to the line of force of the Earth's magnetic field." Such an orientation of this UFO can be deduced from the direction in which the shadow is laid down from the bridge span (after all, at the time of the photograph the sun was shining approximately from the southwest direction). Secondly, from the comparison of the size of this UFO with the height of the truck visible on this bridge, the result of the theoretical calculation of the dimensions of UFO type K7 can be confirmed (according to Table F1 from monograph [1/4], the dimensions of UFO type K7 are: overall diameter D = 70.22 meters, overall height H = 10.03 meters).
On the subject of what "non-composite complexes" of UFOs are, what such a "K7-type" vehicle looks like, and what is such a "magnetic whirl mode", one can read from subsection F3.1.3 in volume 3 of monograph [1/4].
Img.193 (#D5b):
Here's a photo of a set of unpolluted UFOs taken in 2005 in Nevado de Cachi. It captured a set almost identical to the set captured in Poland and shown in the left photo from "Photo #D5a". This photo originally originated from the website www.rense.com. It was sent to me for comment by a reader signing himself "Melody" (Email: melody@dodo.com.au).
Img.194 (#D5c):
An example of a non-coupled Magnocraft configuration. Illustrated here is a case of coupling of two K7-type Magnocraft facing each other with their bases. Typically, in a full reproduction of this drawing, a cross section through this configuration is shown in its lower part, showing the polarity of the propulsors in both vehicles (here I omit this lower part - but it can be seen in Figure F10 in monograph [1/4]). The interactions between the propulsors of both these vehicles produce a system of two mutually balancing forces that keep the vehicles at a certain distance from each other but simultaneously magnetically bind them one to the other. The first of these forces, produced by the main propulsors, causes one Magnocraft to repel the other. The second type of force, produced by the side propulsors of both ships, causes the two ships to attract each other.
The columns of highly concentrated magnetic field running between the outlets of each pair of side thrusters are shown as "black beams." Since these columns have clearly distinguishable edges and capture light, to the casual observer they appear as beams made of black substance. For first-generation Magnocrafts, their cross-section must be square, as it reflects the shape of the cubic oscillation chambers that produce the magnetic field. (Originally this is the drawing which in monograph [1/4] is marked F10 (top).) It shows the external appearance of the entire unassembled configuration, coupled from two Magnocraft type K7, and shown so that the appearance of the vehicles is not distorted by the action of any "magnetic lens". (The best photograph which illustrates such a distortion of the lower UFO vehicle by the action of a magnetic lens is shown in Img.079 (#C1c) from the web page UFO activities on the Earth - about material evidence of hidden activities of UFOnauts on Earth.)
