F. The oscillatory chamber
#1
© Dr. Eng. Jan Pająk

F: THE OSCILLATORY CHAMBER

Let us visualize a small and perfectly shaped transparent cube which represents a new device for producing a super-powerful magnetic field. It would look like an ideally formed crystal of some transparent mineral, or like a cube cut beautifully from shiny glass and showing its content through transparent walls. With dimensions not larger than those of a handy Rubik's cube it would produce magnetic field thousands of times exceeding the power of fields so-far produced on Earth, including fields from the most powerful magnetic cranes and fields from the largest electromagnets in leading scientific laboratories. If we take this glass cube in our hands, it would demonstrate extraordinary properties. For example, in spite of its small dimensions it would be unusually "heavy" and after being switched onto its full magnetic output even the strongest athlete would not be able to lift it. Its "heaviness" would result from the fact that the magnetic field it produces would attract the cube in the direction of Earth's centre, thus a force of magnetic attraction so created would add to its real weight. The cube would also oppose our attempts to rotate it, and similarly like a magnetic needle of a compass it would always try to point into the same direction coinciding with a magnetic north- south meridian. However, if we somehow could manage to turn it into the orientation opposite to this natural alignment simulating a magnetic needle, then to our surprise it would take off and begin to lift us into space. In this way just on its own this crystal cube would be capable of propelling our space vehicles.
After this transparent chamber is examined at close range it would show countless electric sparks flickering inside. The gradual displacement of these sparks onto different trajectories would appear as if in suspended animation. Further observation would reveal that they all orderly jump in the same direction around the perimeter of the cube, "slipping" along inner surfaces of the four transparent side walls. (The remaining two frontal walls of this cubical crystal would be occupied by outlets/poles of the magnetic field which this device produces, and thus they would allow insight into the interior because they would not be crossed by any sparks.) The jump of each individual spark would occur only between two opposite walls of the cube. But because parts of the trajectories of these individual sparks would mutually overlap each other, in the final effect they would create a kind of "vortex made of sparks" which would rotate immensely fast around the magnetic axis of the device. However, this vortex would not follow circular trajectories like this is done by the majority of other rotary phenomena, but it would move along square paths. In turn the rotation of this spark-vortex around the peripheral of a square would produce a powerful magnetic field. The production of this field would not be much different from that occurring during the flow of electric current along coils of a square-shaped inductor.
The explanation above discloses the appearance and operation of the "Oscillatory Chamber", i.e. the device which is the subject of presentation in this chapter. It realizes that the name "Oscillatory Chamber" is ascribed to a completely new principle of magnetic field production, unknown previously on Earth, and invented by myself (i.e. the author of this monograph). This principle employs effects of the rotation of four-segment electrical arc around peripherals of four inner side walls of a cubical chamber. Thus arc is formed from two streams of mutually synchronized oscillations of electric sparks that jump in two mutually perpendicular directions, four subsequent jumps of which cross outlines of a square. These four jumps occur within two oscillatory circuits formed together into the shape of a cubical chamber. Because of the shape and principles employed by this chamber, it is called the “Oscillatory Chamber”.
The structure of the Oscillatory Chamber which accomplishes or implements the above principle of magnetic field production, will take the shape of a cubical chamber made of transparent materials and empty inside (i.e. filled only with a dielectric gas under a low pressure). The six walls of this chamber will be prepared from an electric insulator (e.g. a glass) which is also magnetically neutral, melted together at edges. Two couples of side walls will hold packets of conductive electrodes. These four packets of electrodes, joined to the inner surfaces of four side walls of the chamber, perform alone the function of two cooperating oscillatory circuits with a spark gap. Each one of these two circuits is created by a different couple (i.e. two separate packets) of electrodes attached to two opposite inner walls of this cubical chamber (i.e. the surface of opposite electrodes supplies the required electrical capacitance to the circuit, the mutual distance of electrodes is to perform the function of a spark gap, while the spark itself is to supply the required electrical inductance to the circuit).
The operation of the Oscillatory Chamber summarized briefly will be as follows. The packets of electrodes located on the walls of the chamber are charged with the opposite electric charges. These charges try to neutralize each other, thus they form electric sparks that oscillate between opposite electrodes. Because the four subsequent sparks are forced to jump at appropriately synchronized moments, they form a kind of square electric arc, which circulates around the inner perimeter of the cubical chamber. Thus, the appropriate synchronisation of the oscillatory discharges occurring in such two circuits with crossing sparks, allows for the production of a dipolar magnetic field. The above principle applied in the Oscillatory Chamber allows gaining double benefits. On one hand it eliminates almost all drawbacks inherited in the principles of today's electromagnets, which so-far limited the magnetic output of electromagnets. On the other hand it also provide the Oscillatory Chamber with a variety of unique operational advantages which are the source of unique attributes of this device (i.e. attributes that are unknown in any other device build so-far on Earth).
The complete elimination of drawbacks inherent in the electromagnets is ensured by the following attributes of the Oscillatory Chamber:
1. The neutralization of electromagnetic forces acting on the structure of the chamber.
2. Leaving to the user's choice the time and amount of energy supply (i.e. each portion of energy, whatever its amount and whenever it is delivered, is collected, stored, converted into a magnetic field and released when necessary).
3. The recovery and conversion back into electricity of all the energy dissipated by sparks.
4. The channelling of the destructive consequences of the accumulation of huge electric charges into the direction which reinforces the chamber's proper operation.
5. The independence of the power of control devices from the power involved in field production (i.e. a weak control signal will cause a change in the enormously powerful field produced by the chamber).
The Oscillatory Chamber displays also the following unique advantages unknown in any other appliance built by man to date:
A. The ability to absorb and store theoretically unlimited amounts of energy.
B. Full control over all properties and parameters of the field produced, achieved without any change in the level of energy contained in it.
C. Producing the kind of magnetic field which does not attract, nor repel, ferromagnetic objects (i.e. which behaves like a kind of "antigravity field", not a magnetic one).
D. Multidimensional transformation of energy (e.g. electricity - magnetic field - heat) which allow the Oscillatory Chamber to take over the function of almost every other conventional energy-converting device (e.g. electromagnets, transformers, generators, accumulators, cells, combustion engines, heaters, air conditioners, and many more).
As the final result of such a formation of the Oscillatory Chamber, this device, when completed, will be able to raise the value of a produced magnetic flux to a level unlimited by theoretical premises. Practically it also means that this source of field will be the first one able to lift itself as the effect of a repulsive interaction with the environmental magnetic field (i.e. the field of Earth, Sun, or Galaxy). Thus the Oscillatory Chamber become our "arkway to the stars"

=> F1.
Antworten to top



Gehe zu:


Benutzer, die gerade dieses Thema anschauen: 1 Gast/Gäste