Geheimnisvolle Welten - Tajemnicze światy - Mysterious worlds - Dr. Jan Pająk

Normale Version: S7. To conclude this chapter
Sie sehen gerade eine vereinfachte Darstellung unserer Inhalte. Normale Ansicht mit richtiger Formatierung.
@ Dr. Ing. Jan Pająk

S7. To conclude this chapter

The vast body of evidence presented in this chapter consistently confirms the truth of the thesis proposed in the introduction, stating that: the Oscillatory Chamber is already utilized in UFOs as their propulsor and energy storage. Thus starting from this point the thesis of this chapter should be recognized as formally proven.
The proof that UFOs already use the Oscillatory Chamber introduces numerous implications. The first and the most important of these implications is the confirmation that the idea of the Oscillatory Chamber is valid and feasible. Such confirmation represents almost an equivalent to the presentation of a working model of the Oscillatory Chamber. Thus the mentioned proof should be vital encouragement to become involved in the building of this device as soon as possible. Of course, when the Oscillatory Chamber is built, the path for the completion of the Magnocraft is cleared. The other important implication is that the investigations of UFO Oscillatory Chambers facilitate the rapid and less expensive completion of these devices on Earth, through direct implementations of ready-made technical solutions observed from UFOs.
As a final reflection it is worth stressing that before I invented the Oscillatory Chamber, all the reports from UFO observations, which described a transparent cube witnessed on decks of these space vehicles, remained unnoticed. It seems that people are able to recognize only the objects whose meaning is previously known to them. Now everyone has the opportunity to learn the hidden significance of the plain transparent cube with lightning inside. Thus, it becomes our common responsibility to glean every new fact that may contribute to the completion of this device on Earth.

=> Figure S1a, S1b, S1c, S1d

Fig. S1.
Detached configuration of two UFOs, showing the so-called "black bars". The cross-section of these bars should reflect the shape of devices (Oscillatory Chambers) used in a given vehicle for producing magnetic field.


a) The envisaged side view of two Magnocraft type K7 joined together into a detached configuration (see also part #3 in Figure F6 /?/). Around 11 black bars linking subsequent outlets from n=24 side propulsors in both vehicles are visible.

b) The vertical cross-section through the Magnocraft type K7 shown in part a). The INSERT illustrates the mutual orientation of magnetic poles (N, S) in two side propulsors facing each other assembled in both vehicles.

c), d) Two frames from the series of colour photographs of a low flying UFO taken by Paul Villa of Alberquerque, New Mexico, USA, on 16 June 1963. The best reproduction of this series is published in one of the earlier issues of OMNI magazine (probably 1979 issue). Selected photographs are also reproduced in [1S1.1], page 10 (in colour); [2S1.1] page 210, and [3S1.1] pages 110-111. The UFO illustrated above represents a detached configuration formed from two K7 type vehicles, whose manner of coupling is explained in Figures F10 and S1. The outlines of a lower vehicle, flying in the inverted position, are warped by the action of a magnetic lens and therefore only partially visible. In high quality copies of these photographs, eleven black bars running between the side propulsors of the lower and upper vehicle are clearly distinguishable. The shape of these black bars is unfortunately impossible to determine here. But in similar cases, eye witnesses have firmly reported them as square in cross-section (see subsection S1.1).

=> Figure S2 upper, S2 lower

Fig. S2.
"Black bars" in a UFO. The above diagram illustrates clearly that the black bars formed from a highly concentrated magnetic field yielded by the propulsors of a UFO are square in the cross-section. This in turn provides further evidence that the propulsors of UFOs utilize Oscillatory Chambers for the magnetic field production.


(Upper) A semi-attached configuration obtained through coupling together by their topside domes two type K3 vehicles, mutually facing each other (see also class #4 in Figure F6 /?/ and Figure P13). The Theory of the Magnocraft reveals that in such a configuration between the main propulsor of the lower craft and the side propulsors of the upper vehicle there must appear columns of a highly concentrated magnetic field that traps light and therefore are visible as "black bars" (shown on the sides of the above illustrated vehicle). The cross-section of these columns must reflect the shape of the devices used to generate the magnetic field, i.e. if Oscillatory Chambers are used for this purpose the cross-section of the columns must be a square.

(Lower) The diagram of a spool-shaped UFO presented in the book [5S1.1], page 11. It illustrates a witness's recollection of the spaceship which on May 9, 1969 abducted a soldier named Jose Antonio da Silva from Victoria, Brazil. He was found 4 days later in Bebedouro, 800 kilometres away. From the point of view of the Theory of the Magnocraft, the illustrated spaceship represents the semi-attached configuration shown in part (a) of this Figure. Because the "black bars" formed from the field of this UFO in fact have square cross-section, thus their outlines documented with this illustration provide further evidence that UFOs use Oscillatory Chambers for the magnetic field production.

=> Figure S3.

Fig. S3.
Outlines of a UFO's twin-chamber capsule scorched in grass. This photograph presents marks scorched by a UFO type K5 when it landed on the grass of a football field that belongs to the "Pirates Football Club", Dunedin, New Zealand. The UFO landed in the inverted position (see Figure S3 "b"), slightly slanted towards magnetic northward, and the outlet from its main propulsor almost touched the grass. Therefore marks that its propulsors scorched in the grass consist of two separate parts: (1) a slightly deformed (i.e. having a small concavity on its north side) ring of bare soil, 8.5 metres in outer diameter, and (2) a square mark burnt in the centre of this ring. (In the above photograph a reference circle of exactly 1 meter in diameter is placed to the left of this square mark, with its arrow pointing magnetic north.) The square mark has a side dimension of 1.55 meters, and an inner square of grass is left non-scorched inside it (the side dimension of this inner non-scorched square is 0.89 meters). This means that the UFO's main propulsor operated in the mode of "outer flux prevalence" - see Figure C6 /?/ "b". The landing took place around 15 January 1989, but I photographed this site on 17 February 1990. Apart from scorching the above landing marks, the same vehicle also flattened a large lamp located in the same football field and scorched a similar ring under it. Mrs Kathy Morrison (17 Taupo Street, Ravensbourne, Dunedin) witnessed this UFO when it approached the landing.

=> Figure S4.

Fig. S4.
A drawing of a main twin-chamber capsule from an ascending UFO. This capsule was seen by Mr Wayne Hill of Invercargill at 11:30 PM on 20 December 1978. It was observed directly from underneath, when hovering at the height of about 30 metres. It had the shape of two cubes, one inside the other, with their front outlets both facing the witness. The side dimension of the outer cube was about aM=10 metres (this means that the observed UFO most probably was the type K9 - see dimension "aM" in Table F1). The walls of the outer cube were lit by a yellow glow, whereas the inner one remained completely dark. This strong, yellow glow seemed to be more concentrated in the corners of the outer cube from which it shone downwards. The remaining, non-glowing space between both cubes was greyish in colour. The observation took place on a lone road about 7 kilometres south of Nelson, New Zealand, and lasted for about 20 seconds. Initially the UFO was flying in the south to north direction, and then stopped moving exactly above the witness - as it is shown in the drawing. The action of a magnetic lens hid the contour of the vehicle and only the outlines of both Oscillatory Chambers (i.e. inner dark and outer lit up) from the main propulsor remained visible - see the explanations in subsection F9.4.1 /?/ and Figure F32 /?/.

=> Figure S5a, S5b

Fig. S5.
Photographs of twin-chamber capsules from UFOs. Apart from proving that these configurations of Oscillatory Chambers are already used in UFOs, both photographs document also the "magnetic lens" effect formed by field of UFOs. The circumstances when such a magnetic lens effect appears to the photographer are explained in Figure F32 /?/. Notice that in both above cases the thickness of the space between the side edges of the outer "aO"
and inner "aI" chamber fulfils the equation (C9): "aO=aIA√3" - see Figure C5 /?/.
a) One of the best colour photographs of a twin-chamber capsule from the main propulsor of an ascending UFO. It was taken by a teacher in Hawaii and subsequently published in the book [3S1.3], "Into the Unknown", Reader's Digest, Sydney, Australia, 1982, ISBN 0-909486-92-1, page 315. In the photograph above the vehicle's main magnetic circuits form an effective magnetic lens which dissipates the outer parts of the UFO - see also Figure F32 /?/. But because the central magnetic circuit radiates from this lens and forms a type of vision channel directed towards the photographer, the twin-chamber capsule that produced this circuit remains clearly visible. In the photographed capsule the resultant flux is provided by the inner chamber, whereas the entire output from the outer chamber is drawn into the circulating flux - see Figure C6 a) /?/. Therefore in higher quality copies of this photograph, a cone-like column of a magnetic field yielded by the inner chamber can be clearly distinguished. This cone conceals the outlines of the remaining two edges of the capsule located behind it. The magnetic field bent by the outer chamber into the circulating flux has a clearly distinguishable boundary and therefore acts as a trap for light (see the description of "black bars" - subsection F3.4). Thus, the inside of the outer chamber is visible as a
blackened area.
b) A night-time photograph of the twin chamber capsule from an ascending UFO,
taken by a newspaper reporter over Clovis, New Mexico, on January 23, 1976 - see [5S1.1] page 49. The illustrated capsule operates in the mode of outer flux prevalence, the visual appearance of which is explained in Figure C6 b) /?/. In this mode the resultant magnetic flux is produced by the outer Oscillatory Chamber, whereas the entire output of the inner chamber is bound into the circulating flux - see the explanations in Figure C5 /?/. In this way the resultant flux yield to the environment must strongly ionize the air, thus in night photographs it appears as thick, glowing edges of an outer diamond. On the other hand the circulating flux must produce a black inner diamond, which because of the darkness is not distinguishable from the similarly black background. Because of the orientation of the above capsule towards the photographer, two rear glowing edges of the outer diamond are hidden behind the non-transparent column of a magnetic field yield from the capsule. Therefore the above picture reveals only two front glowing edges of the outlet from a twin-chamber capsule which from a distance appears as a half-diamond.

=> Figure S6a, S6b

Fig. S6.
A reconstruction of the Oscillatory Chamber seen on a UFO. This transparent cube was sighted by Mr Robert Luca on a UFO deck. It contained electric sparks which looked like lightnings frozen inside. (Compare this illustration with Figure C3 a) /?/ that shows the appearance of such an Oscillatory Chamber.) The above diagram and description are reproduced from the book [2S1.4] by R. E. Fowler, "The Andreasson Affair, Phase Two" (Prentice-Hall, Inc., USA, ISBN 0-13-036624-2, page 70) by kind permission from Mrs Betty A. Luca, copyright holder. It presents the outer Oscillatory Chamber from the twin-chamber capsule which constituted the main propulsor of this UFO. The above illustration introduces a breakthrough in our certainty of the Magnocraft's principles, as it not only confirms through an eye-witness's report that the Oscillatory Chambers are already utilized in the propulsion of UFOs, but it also proves that our intention to built the Oscillatory Chamber on Earth is feasible and valid.


Here is how Mr Robert Luca describes this device in his report: "Then there's a box on the other side that's behind this bench and I can see from standing. It looks like a glass cube and it fascinates me 'cause it's filled with, looks like black smoke. It looks like there's lightning inside it or something gold. Looks like it has streaks of gold running all through it - a bright, bright gold. It's a cube, maybe not a yard square. No, it's less than three feet and it's got all little lightning bolts inside it. It's all black with these gold streaks running through it (Figure 13). It looks like the lightning has been frozen right in its path."

a) The predicted appearance of the Oscillatory Chamber of the first generation (described in volume 2 of this monograph).

b) The appearance of the working Oscillatory Chamber seen on deck of a UFO by Mr Robert Luca.

=> Figure S7.

Fig. S7.
A drawing that probably presents an ancient diagram of the Oscillatory Chamber. It was found in a manuscript originating from Tibetan Buddhists. It is possible that this symbolic drawing illustrates either a technical design of the Oscillatory Chamber, or the entire spherical propulsor containing such a chamber. While analysing this drawing, one may notice clusters of needles which exactly correspond to the following description of a UFO Oscillatory Chamber provided by Mrs Betty A. Luca (see the end of subsection S1.4): "inside had thin protruding stems with tiny glass droplets on the end".


In the course of later research I learned that Tibetan Buddhists from Nepal have a long tradition of producing technical drawings of this particular device. They call these drawings "thangka". Thangka drawings are now even a kind of tourist attraction of Nepal.

It seems to be relevant to mention at this point that almost all ancient sculptures show Buddha as having extraordinary long ears (i.e. almost touching his shoulders), but the same sculptures show other people surrounding him as having normal, human ears. The Buddhist legend from China about the so-called "Eighteen Immortals" admits openly that people having such long ears were not ordinary mortals, but beings that show supernatural powers similar to those displayed by UFOnauts today. For example one of these Eighteen Immortals, named "Nantimitolo" or "Timing Dragon Lohan", who lived on Earth at the time when the King of the Sea flooded China (i.e. most probably at the time of the Tapanui Explosion - see [5]) was known from his ability to fly a mythological creature then called a "dragon" (which most probably represents one of a few ancient interpretations for UFO vehicles - see also subsection R4). On the other hand it is reported by numerous eye-witnesses that some UFOnauts have these kinds of ears. Although Buddha is recognized as a historical figure and in many present publications he is assigned a "human" biography, a significant number of facts about him remain unclear. Some ancient sources directly claim that he was one of the Immortals and held supernatural powers. Thus, such a vital anatomic difference as "ears of an Immortal" appearing on sculptures of Buddha could mean that his first priests had access to extraterrestrial technologies and in fact could know the design and operation of the Oscillatory Chamber.

=> Figure S8a, S8b, S8c, S8d, S8e

Fig. S8.
The photograph of the outlet from the inner oscillatory chamber of the main propulsor of an invisible UFO of the second generation. It is shown together with supporting drawings that explain what this photograph actually represents. The UFO propulsor operates in the mode of inner flux prevalence. Interpretation of this photograph is provided in subsection S6.


a) Two outlets from propulsors of a UFO of the second generation, shown in both modes of operation. They have shapes of octagons that glow with like a supernatural, white, the so-called "extraction glow", identical to that which is captured on the above photograph. The dotted area is marking this fragment of the outlet from an inner chamber, which was captured on the photograph illustrated here.

b) A photograph of a fragment of outlet from the main propulsor of an invisible UFO. (Take the notice of the white 5 sized polygon visible in the top-right corner of the photograph.) This photo was taken from a tripod near the top of Babia Gora, Poland, on 5 July 1999 around 7:30 am, with a photo camera of Leszek Staszl, type Canon Eos 630. The original photo was intended as a group photo of participants of this research expedition, including (from left): Kazimierz Panszczyk, Leszek Staszl, and Ludwik Krzeczkowski. But by an "accident" the photo recorded also evidence, that all research expeditions to Babia Gora aimed at finding the entrance to UFO tunnels located there, always are accompanied by invisible UFO vehicles, which with telepathic manipulations on minds of investigators make this finding more difficult.

c) The appearance of the twin-chamber capsule formed from two oscillatory chambers of the second generation (shown also as (2s) in Figure C8 /?/). It has the shape of a rod or column with octagonal cross-section, in the centre of which another similar rod of column is free floating.

d) This Figure (shown also in Figure F32 /?/) explains that within a powerful magnetic field that is produced by UFO vehicles, light moves exclusively along force lines of magnetic field, because this field performs for the light the function of a bundle of fibre-optic cables. Thus in order to see the outlet from a UFO propulsor as an octagon, the observer would need to look at it along the magnetic axis of the vehicle. But when this outlet is viewed under an angle, then not more than 40% of the entire surface of the octagon can be seen, and this surface is deformed by the curved path of magnetic field force lines (in a similar manner as a picture of an octagon would be deformed by deflection in a concave mirror). Exactly such a shape, i.e. slightly less than a half of a deformed octagon, or more strictly two edges of that octagon visible along the entire their length, and another two edges visible only partially, was captured on the above photograph.

e) A map of the area where the above photo was taken on the Babia Gora, Poland. Symbols: 1 - the UFO propulsor, 2 - photographed people, 3 - ruins of BV shelter, 4 - source of the stream called "Hungry Water", 5 - mountain shrubs, 6 - rock rubble, 7 - an angle of seeing by the camera lens (47 degrees).

=> T.